Results 1 to 2 of 2

Thread: Adding z axis proximity switch to older PRT

  1. #1
    Join Date
    Mar 2019

    Default Adding z axis proximity switch to older PRT

    Looking for pics of how people have added a proximity switch to the z axis.

  2. #2
    Join Date
    Jan 2004
    iBILD Solutions - Southern NJ


    Just add it...Note what kind it is (NO or NC) and then plug it into any free input on the board. I would suggest Input 5. Then in SB3, set up the switch using the VN command and select the switch type and action using the drop down. There's not a whole lot more to it than that.

    If using an inductive switch, there will most likely be 3 wires. Power, Gnd & Signal. Power to 12v (24v if you have it), Gnd to Gnd on the board and Signal to the Input.
    High Definition 3D Laser Scanning Services - Advanced ShopBot CNC Training and Consultation - Vectric Custom Video Training

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts