3D printed dust shoe

[EricSchimel]

Hey all, I recently re-printed and re-designed my dust shoe on my ShopBot. Thought you folks would appreciate it:

https://youtu.be/BBrizADYwgE

2019-08-28 at 10.18 AM.jpg

[srwtlc]

Nice!

I hear ya on the printing time factor, printed a bracket to mount my fixed tool touch off device that fit within the C-channel leg and it took around 24 hours!

[EricSchimel]

I did this one on an Ultimaker with a larger nozzle and it was all done in around 11 hours for all of the parts. I could probably shave an hour off of that.. but that still qualifies as a long time