Results 1 to 5 of 5

Thread: Wanted: 10hp VFD

  1. #1
    Join Date
    Dec 2020
    Posts
    7

    Default Wanted: 10hp VFD

    Looking to get a 10hp VFD as Im hoping to run 220v 1ph to it and use it for a 5hp Colombo spindle. Please PM if you have one for sale. Thanks

  2. #2
    Join Date
    Oct 2010
    Location
    TX
    Posts
    769

    Default

    That is easy and relatively cheap ... https://www.automationtechnologiesin...7-5kw-10hp-34a

  3. #3
    Join Date
    Dec 2020
    Posts
    7

    Default

    thanks! hoping to get a delta as a direct replacement. I guess I could do a 5hp model as well which is currently whats on it. Have you had luck with that brand? thanks again!

  4. #4
    Join Date
    Dec 2020
    Posts
    7

    Default

    also noted this might be an option for me if anyone has this available for sale: Yaskawa CIMR-VUBA0018FAA (5hp, single phase input)

  5. #5
    Join Date
    Dec 2008
    Location
    , Richmond Tx
    Posts
    1,057

    Default

    Just fyi, no matter which one you buy, it will need to be programmed, even if you get the same one you have now. It may be possible to buy one from shopbot that is already programmed. It is not difficult to do, but will require some reading and effort.
    Kenneth

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •