I’ve tried direct to a USB port and to a hub. No luck
Member
I’ve tried direct to a USB port and to a hub. No luck
Member
I mean even when machine IS turned off
Senior Member
What type of USB connection do you have on your controller, direct to the board with the USB cable or one of the short USB to Serial adapters? If you have the adapter, try a new one, as they occasionally go bad. Otherwise, contact SB HQ for further support.
Scott
Member
It’s a usb direct to the board.
Originally Posted by srwtlc
What type of USB connection do you have on your controller, direct to the board with the USB cable or one of the short USB to Serial adapters? If you have the adapter, try a new one, as they occasionally go bad. Otherwise, contact SB HQ for further support.
Senior Member
Time to contact Shopbot support…….let us know what the solution is……
Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
2.2Hp universal 4 zone Vac Table
Posting Permissions
Reply With Quote