Results 1 to 9 of 9

Thread: Shopbot Control Software Issue

  1. #1
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    546

    Default Shopbot Control Software Issue

    I have an issue with a warning that comes up on my Shopbot control software.....
    When I try to run a job a dialog box that comes up says, "Unit Values for Z and A are not the same"...then I have to quit the job.

    Not seen that before so not sure what it means or how to correct.

    Checked Unit Values but seems OK....not changed anything there anyhow...

    Attached pics of above.

    I'm not the sharpest tool so need some advice.....

    Thanks

    MikeUnit Values.JPG
    Unit Values_Z_A_Issue.JPG
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

  2. #2
    Join Date
    May 2014
    Location
    MA
    Posts
    611

    Default

    Looks to me like they’re not the same… one is in the negative and one is positive. What do you have on your A axis? A rotary?

    Try changing the values for the A axis to match the Z and see if the error goes away.

    If you don’t have a rotary maybe that setting got turned on somehow.

    Perhaps someone with a little more experience in Shopbots running more than 3 axes could chime in here. I only had a Desktop with a rotary for a short time

  3. #3
    Join Date
    Jun 2001
    Location
    Austin, TX
    Posts
    445

    Default

    Last week I began getting a similar message, "a Axis out of range", (I think). I have nothing on the A. My rotary is on the B axis and after talking with SB support I just turned off A. The command escapes me now but should not be hard to find. If you are not using A it will solve your problem.

  4. #4
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    546

    Default

    [thanks guys for your quick reply
    I have nothing on A so somehow it has corrupted in Unit Values
    Will chase up how to turn off unless someone knows and can save me the time researching this.

    Cheers
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

  5. #5
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    546

    Default

    Quote Originally Posted by Simops View Post
    [thanks guys for your quick reply
    I have nothing on A so somehow it has corrupted in Unit Values
    Will chase up how to turn off unless someone knows and can save me the time researching this.

    Cheers
    BTW it only happens when I use my 1/16 end mill……no problems when using any other bit…..strange?

    Cheers
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

  6. #6
    Join Date
    Mar 2013
    Location
    Memphis TN
    Posts
    1,015

    Default

    Quote Originally Posted by Simops View Post
    BTW it only happens when I use my 1/16 end mill……no problems when using any other bit…..strange?

    Cheers
    What the cheese? How could the SB control program know what you've chucked up?
    ShopBot Details:
    2013 PRS 96x60x12 (Centroid upgrade)
    4hp Spindle
    12" indexer
    Aspire
    Rhino
    Fusion 360
    Ferrari 360
    Prusa MK3S+
    Prusa XL multi-tool

  7. #7
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    546

    Default

    Quote Originally Posted by coryatjohn View Post
    What the cheese? How could the SB control program know what you've chucked up?
    Exactly why this has me baffled……
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

  8. #8
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,847

    Default

    Are you using a manual or auto tool change post processor, and if so, what's the number for that tool? Z axis tools are 1-19 and A axis tools are 20-29.
    Scott




  9. #9
    Join Date
    Feb 2011
    Location
    Melbourne, Australia
    Posts
    546

    Default

    Quote Originally Posted by srwtlc View Post
    Are you using a manual or auto tool change post processor, and if so, what's the number for that tool? Z axis tools are 1-19 and A axis tools are 20-29.
    Ahh! I think you may have solved it…….I’m using 22 for the 1/16 end mill bit……light bulb moment…….

    Thanks muchly
    Buddy 48 Standard with 2.2 Hp Spindle with standard and 6' stick. Aspire 10.5
    2.2Hp universal 4 zone Vac Table

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •