We are about to post our PRS Alpha machine on our University Surplus site. (I'll let you know when it goes live). I was trying to establish a starting bid price and thought I might ask the group.

The machine has been lightly used (light to moderate use over about 3 years total). We have a second shopbot 48 x 96 with a tool changer that gets most of the use so the decision was made to sell this one.

Through our University Surplus it would come listed as shown and the buyer would be responsible for any auction fees and shipping/pick-up.
I asked Shopbot about PartWorks transfer and they said the buyer would have to contact Vectric and ask for a transfer (estimate $150).

I know these units depreciate a fair bit. I will list the specs and the original price below.
Let me know if you have any questions/feedback and thanks for the help!

Specs as shipped new:

PRSalpha144-72-24
zzero
dust skirt and hoses
prox kit
PartWorks Software

Control Box 1 Spin Dom 2.2 - 5HP
11 0v 1 Phase, 230v 3 Phase

HSD 4HP 230V 3PH PRS
Alpha PO957
24Von Board

$33,000 no tax shipped
$30,000 minus crate and shipping

Yaskawa V7-4X drive.jpgShopbot spindle mfg plate.jpgShopbot info panel sticker.jpgShopbot left end view with hose.jpgShopbot front view.jpg