Results 1 to 3 of 3

Thread: Safety Z

  1. #1
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    964

    Default Safety Z

    After executing C2 to zero

    x and Y my Z setting is at 1.0. I would like to change HBO that to 0.5. how can I do that?

    Phil

  2. #2
    Join Date
    Dec 2000
    Location
    Thorp, WI
    Posts
    2,846

    Default

    VC Safe Z Pull-Up.

    Otherwise, look at what your design software is using for home/start position, Z above material, and rapids above material.
    Scott




  3. #3
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    964

    Default

    Thanks, Scott. I've been setting up a rotary indexer and the tool has less headroom.

    Phil

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •