Results 1 to 3 of 3

Thread: Speed control

  1. #1
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    964

    Default Speed control

    What command is issued to control the rotational speed of an indexer?
    I've been looking, haven't been able to find the answer.

    Phil

  2. #2
    Join Date
    Oct 2000
    Location
    Willis Wharf, VA
    Posts
    1,763

    Default

    You can use either the MS or VS command, with the B-axis speed that you want in the 4th place after the XY, Z, and A axis values. So if you want to set the B axis speed at 50 degrees/sec using the MS command, the command would be MS,,,,50

    You can read about how this works and the differences between MS and VS in the ShopBot Command Reference. It's installed with the ShopBot software and can also be downloaded at https://www.shopbottools.com/ShopBot...les/ComRef.pdf

  3. #3
    Join Date
    Mar 2004
    Location
    Lenox High School, Lenox MA
    Posts
    964

    Default

    thank you, Bill.

    Phil

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •