2015 PRS Standard with 5hp Columbo Spindle. Wired for 3ph but a phase converter will let you put it at a residence. Touchpad tool zero. Digitizing Probe. Desktop Computer with Aspire 8.5, Vcarve and PhotoVcarve. 2hp dust collector. extra spoil board material. Startup assistance. Asking $15k.
I've gotten older and am in the process of closing my shop. It's a great woodworking and prototyping machine with capabilities of light production with that Columbo beast on it. This is a strong router. I've done a little of everything but mostly plywood furniture. It has no problem cutting 7/8" plywood in one pass at 4in/sec. Please text me and I'll be glad to chat about it (828-244-0956). I have everything you need to get set up and running with everything above and the wiring/conduit (about 50ft) from the circuit breaker. If you're not far away, I could even give you a hand. If you're a newbie and worried about the process of getting started, I can get you on the right track. I also have a 36" Timesaver that can be had cheap! Can be seen in action during March. Shop may be vacated by April. Price compare this package at $30k+.