I have a SB Desktop 24 x 32 table. I've been asked to make a farm table. 38" x 90" top with 4" x 4" legs. I wanted to cut the mortises on the SB but I didn't have enough Z height. It was also time to put a new spoilboard on the machine.
Most of the work I do is not very large so I only use the front 12 - 18" of the table. So I decided to split my table at 18" so I can clamp thick material like the 4 x 4 legs to the frame of the machine.
I used biscuits, without glue, to align and reinforce the table. My T-tracks and grid extend into the removable part of the table.
I was able to clamp the legs and cut the mortises with the extra Z height I gained.
Also I've been considering buying a rotary axis. This added Z will give me the room I need if I decide to buy one.
Getting more Z height
Reply With Quote
