Also, if you are going to do ANY milling into plywood, use a down spiral bit otherwise you will tear up the veneer.
Senior Member
Also, if you are going to do ANY milling into plywood, use a down spiral bit otherwise you will tear up the veneer.
Don
Diamond Lake Custom Woodworks, LLC
www.dlwoodworks.com
***********************************
Life is not a journey to the grave with the intention of arriving safely in one pretty and well preserved piece; But to skid in broadside, thoroughly used up, worn out, bank accounts empty, credit cards maxed out, defiantly shouting "Geronimo"!
If you make something idiot proof, all they do is create a better idiot.
Posting Permissions
Reply With Quote
