Guys, I am new to this, but am trying to configure my vacuum table. I have a 1 mand cabinet shop and the size of my table is 2m x 3m. I just orderd 4 lighthouse pumps from Ward and he recomended I talk to you guys. I really liked the black box as was and the QUAD setup. My question is simple. I need to be able to get the max suction, and also do not even know the best way to connect the 4 pumps. Can you provide me some diagrams to help me with this - Will really appreciate this!
I usually cut 12mm MDF with a single cut, but then from time to time also have smaller peaces I cut such as 3mm MDF. The MDF sheet size is 1.7m x 2.8m
