just got this delivered today. now to find the time to install it. I notice no spring in it so it does not lift up if the power is cut? does the stay in place when the machine is powered off?
Senior Member
got my 1500.00 chunk of steel from shopbot.
just got this delivered today. now to find the time to install it. I notice no spring in it so it does not lift up if the power is cut? does the stay in place when the machine is powered off?
Senior Member
As I recall I moved my existing springs when I upgraded.
They don't come with it as different spindles/routers take different springs.
Senior Member
Wow, that is a beautiful assembly! I assume it is the Z/spindle mount for a PRS. It certainly makes my PRTalpha Z/spindle mounting assembly look like a model T in comparison. Chuck
Chuck Keysor (circa 1956)
PRT Alpha 60" x 144" (circa 2004)
Columbo 5HP spindle
Aspire 9.0, Rhino 5
Senior Member
ya I was getting slop in mine after so long and the 2" extra z is really needed. I see how the springs go in now.
Member
Nice! Please post some more pics of it and your installation if you can.
Senior Member
will do I have been too busy and I was too tried today to do it.
Posting Permissions
Reply With Quote