PRSalpha control board for sale, excellent condition (Bridgeport, CT)

[M_Bruno]

Removed from new-to-me PRSalpha 5x10 in the course of update to Acorn controller. I powered up tested all three axes prior to purchase, but couldn't test spindle operation as I did not have three phase power, only single phase. Which is to say, I believe this board to be fully functional but cannot warranty. It appears to be in perfect physical condition.

SB part number 001003 v0.7; processor daughter board v201A

IMG_20240418_181101.jpg
IMG_20240418_181144.jpg

Make me an offer. Buyer pays shipping, or picks up.

[M_Bruno]

Bump, a year later. If no takers, I'll soon scrap it.

[jerry_stanek]

That is a 4g standard board not an Alpha

[M_Bruno]

That is a 4g standard board not an Alpha

Interesting. Everything else is Alpha, from the Oriental servo steppers/drives, to the "PRS-A" part number sticker on the control box, to the included manuals, but this is my first SB. Please educate me: what's the difference, and why would a standard board be in an Alpha machine?

[ken_rychlik]

His description looks correct. It is not a 4g board. The Gecko drivers mount directly to the 4g board and this is not set up for that. I think the entire controller with drivers, motors, ect... would sell, but just the board would be understandable if it didn't sell.