Hi all,
I am getting ready to build a new shop and wanted to get ideas - seen other post like this and learned a lot, so would like your input.
So far I am looking at a metal building, concrete floor, spray insulation.
I am in Florida so no floor heat will be needed.
Think I am settling on a 40' x 100' x 14' with a 2:12 pitch
Was thinking a 16' awning down one side but now not so sure.
Think I want to be able to drive through the building across the 40'
I am in a 24' x 32' two story building we built in 96 and it is real tight, I build RTA and custom cabinets along with custom furniture. Some equipment includes 4x8 cnc, 24" sander, table saw, shapers, 13 & 15 & 20" planers, band saw, small lathe and such.
Below is a rendering of a possibility
Thanks in advance
Tim
Shop 2.jpg